Ecler DAM614 Rackmount 6×4 Digital Mixer with DSP for AV Installations

Description HUB1408 is a digital zone manager with 14 inputs and 8 outputs. It has the HANGAR embedded web-server application (control from standard web browser in Windows / MacOS, etc.) for its configuration; remote control from physical wall installation panels, call (paging) stations and applications for mobile devices (Android, iOS). Includes DSP with specific functions for both inputs and outputs. HUB Series offers multiple possibilities, being intuitive and easy to configure. From the least experienced user to the most expert, you can set up a professional audio installation in a matter of minutes (Plug and Play). It is the perfect solution for any type of sound that requires managing and controlling different zones.FEATURES14 inputs, 8 outputs digital zoner with integrated DSPEasy programming and control by embedded web application, HANGAR, and standard web browserControl from the front panel and user remote control by: eMCONTROL1 wall panels (up to 8) / eMPAGE paging consoles (up to 2) / Ecler pilot application, compatible with Android and iOS:control graphic panels set to user needs (pilot panels) / TP-NET protocol (RS-232 interface with DB9 connector)for control and integrating with third party systemsControl available, by zone (output): selection of audiosource (input), volume adjustment and MUTE, 3 band tone adjustment and general volumeFour priority levels, ducker/pager functionsAvailable DSP: frequency shifter, link stereo, delay,crossover filters, 8-band graphic EQ, compressor/limiterand much morePredefined setups for a quick installation (plug and play)MUTE port can be activated by closing the external dry contact, affecting programmed outputs to this effect APPLICATIONSRetail   Education   Corporate   Sports & Wellness   Hospitality SPECIFICATIONSTechnical SpecificationsDigital Signal Processing (DSP)Sampling Rate: 48 kHzBit Depth: 24-bitA/D & D/A Conversion: 24-bit / 48 kHzFrequency Response: Total Harmonic Distortion Noise (THD N): Output Noise Floor: 110 dB (from 20 Hz to 20 kHz)Crosstalk: 90 dB (20 Hz to 20 kHz)Audio InputsTotal Inputs: 62 x Stereo Line Inputs: RCA connectors4 x Mic/Line Inputs: Euroblock connectorsInput Sensitivity:Line Inputs: 0 / -6 dBV (internally jumper-adjustable)Mic Inputs: -20 / -50 dBV (externally adjustable potentiometer)Input Impedance:Line Inputs: 13 kΩMic/Line Inputs: 24 kΩ electronically balancedPhantom Power: 17.5 VDC (software switchable)Common-Mode Rejection Ratio (CMRR): 55 dB (20 Hz to 20 kHz)Audio OutputsTotal Outputs: 4Balanced Outputs: Euroblock connectorsNominal Output Level: 0 dBVOutput Impedance: 300 Ω electronically balancedCrossover Filters: Low & High Pass Butterworth 12 dB/octave (20 Hz to 20 kHz)Compressor/Limiter: Threshold: -36 to 12 dBV, Ratio: 1:1 to 1:inf (Limiter), Knee: Hard/Soft, Attack Time: 0.1 to 500 ms, Release Time: 10 to 1000 ms, Make-up Gain: 0 to 10 dBDelay: Adjustable from 10 to 1000 ms (10 to 343.4 meters)Signal Processing FeaturesInput Processing:10-Band Graphic Equalizer: Independent per inputHigh-Pass Filter: Adjustable for mic/line inputsNoise Gate: Independent per mic/line inputFeedback Suppressor: Independent per mic/line inputTalkover Function: 2-level priority (Pager/Ducker), triggered by mic/line inputsFrequency Shifter: For feedback suppressionOutput Processing:10-Band Graphic Equalizer: Independent per outputCrossover Filters: Low & High Pass Butterworth 12 dB/octaveCompressor/Limiter: Independent per outputDelay: Adjustable per outputConnectivity & ControlRS-232 Port: For EclerCOMM and CA-NET protocol compatibilityRemote Control Ports: 4 x RJ45 (0-10 VDC) ready for WPa series wall panelsMute Control: Assignable to any output zonePower & PhysicalPower Supply: ±17.5 VDCMains Voltage: 100–240 VAC, 50/60 HzPower Consumption: 12 WDimensions (W x H x D): 482.6 x 44 x 120 mmWeight: 2.00 kg